Pressure Systems 9022 Manual de usuario descargar pdf (Pagina 26)

www.meas-

spec.com

Measurement Specialties Inc. NetScanner System (9016, 9021, & 9022) User’s Manual

2 - 6

Use of Static or Dynamic IP settings may be selected through the Set Operating Options ('w')

command. If you are unsure how your module is configured, check the Tx LED during module

power-up. If it begins to blink periodically after the module power-up, your instrument is

configured for the Dynamic IP assignment protocol. (Tx LED remains OFF in static IP

configuration.) If configured for Dynamic IP assignment, a dynamic server must be configured

on the network to return an IP address to the module. Without an IP address, the host will be

unable to open a TCP/IP or UDP/IP connection to the module.

2.3.5 Diagnostic Port Hookup

Each NetScanner



System module contains a Diagnostic Port that supports diagnostic and

operational functions. The Diagnostic Port has only a simple RS-232 asynchronous serial

interface. The connections are made via certain pins of its common circular connector. Cable

connection should be made according to Table 2.1.

NetScanner



System

Diagnostic Port

Connector

GND

Table 2.1

Diagnostic Port Wiring

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 193 194

Sin comentarios

Pressure Systems 9022 Manual de usuario Pagina 26